|
Post by johnno on Mar 17, 2014 1:20:00 GMT
I've never used AGC but When I set the agc to any setting the image goes dark.
The other night I had a image of M42 but when I set the agc on to any setting all I got was a dark/ black screen and only the stars was visible, what am I doing wrong or is there a problem with camera.
lens = manual
shutter = x512
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 17, 2014 4:34:02 GMT
Mine does the same. Any time you change the agc it starts the Intergration all over.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 17, 2014 9:34:04 GMT
Yeh mate thats what it does. It will go full black for a while whenever you change the AGC. A work around to speed it up is.... When you change agc just cycle through the shutter speeds. I.e. when on x512 scroll to the left and go through all the speeds back to x512 then everything pops on screen At least it doesnt have the '3min of death' timer that the mallincams have when changing agc lol!
|
|
|
Post by johnno on Mar 17, 2014 11:34:51 GMT
Thanks guys, i'll give it another try. So you've got to wait a bit longer, I must of waited about 15 to 20 seconds and nothing happened.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 17, 2014 12:23:39 GMT
Yep they all seem to do it, as Chris says when you change it take the shutter down to x128 or so and it kicks back in again. Personally I just keep it to low.
AGC is a pain on the cams I think this is part of the ln300 problem I had.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 17, 2014 14:01:22 GMT
Yeh mate thats what it does. It will go full black for a while whenever you change the AGC. A work around to speed it up is.... When you change agc just cycle through the shutter speeds. I.e. when on x512 scroll to the left and go through all the speeds back to x512 then everything pops on screen At least it doesnt have the '3min of death' timer that the mallincams have when changing agc lol!
This works for me as well. However, I don't seem to have much luck with AGC set to anything except Low.
Kim
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 17, 2014 17:44:34 GMT
Ive had decent results with it set to high a few times. Mostly use it on low tho. Think it depends on conditions.
|
|