Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 26, 2020 2:52:36 GMT
Here are a couple of repeats from the other night .This time with the imx 432 on the rasa. Gain is left at zero otherwise there is total white out. ngc 253 8s x 30 ngc 6744 8s x 30 ngc 2070 8s x 23 ngc 7552 8s x 30 in grus quartet I will try some colour on the Esprit next clear night
|
|
|
Post by Dragon Man on Nov 26, 2020 11:03:09 GMT
Geez, I'd be happy with those results Paul!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 27, 2020 6:50:26 GMT
Happy enough Ken. The Esprit deserves a run next. With daylight saving ,the last few sessions have been between 12 and 2 am. I go to bed early, get up for a couple of hours when I wake up and then go back to bed. Probably not a good sleeping pattern cheers Paul
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 29, 2020 22:34:08 GMT
wasnt expecting a clear night so didnt have the esprit set up. couple more images using the 290 on the rasa 10sec x 18 stack ngc253 ngc 7552 part of the grus quartet m74 pointing towards a bright moon with no filters so not much detail. m77 also pointing toward the moon
|
|
|
Post by Dragon Man on Nov 30, 2020 10:50:58 GMT
WOW!!! that 253 is spectacular!!!! I love the dust donut too
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 30, 2020 15:16:41 GMT
I love the dust donut too Yeah,me too Is there anything I can do about it. Howie gave me directions to work out if it was between the glass and the sensor. ..and it is,but I dont know what to do about it. cheers Paul
|
|
|
Post by davy on Nov 30, 2020 18:41:23 GMT
Got a stinker of one on my zwo asi178,, needs stripped down ðŸ˜
|
|
|
Post by Dragon Man on Dec 1, 2020 9:30:44 GMT
I love the dust donut too Yeah,me too Is there anything I can do about it. Howie gave me directions to work out if it was between the glass and the sensor. ..and it is,but I dont know what to do about it. cheers Paul Paul, when a dust particle gets underneath a glass window and the window is not removable you can tap the camera repeatedly and hope it drops off the glass and falls to the edge. You could get a vibrating tool or an electric toothbrush pressed hard against the body (using the hard plastic back of the toothbrush, not the bristles) to try vibrate it loose.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 2, 2020 11:44:34 GMT
Thanks Ken, I will give it a go. The bunny really annoys me. Here is ngc 253 on the esprit 80, zwo 183 and 10s x 18 cheers Paul
|
|
|
Post by davy on Dec 2, 2020 13:27:30 GMT
Thanks Ken, I will give it a go. The bunny really annoys me. Here is ngc 253 on the esprit 80, zwo 183 and 10s x 18 cheers Paul know the feeling Paul,,, not used my 178 since,,
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 2, 2020 23:29:38 GMT
The 290 is my favorite camera on the rasa for galaxies so the bunny is a pita. Here is the helix on the esprit ,183, and 20sec x15. Did a bit of stretching on fitswork .
this is what it looked like saved from sharpcap cheers Paul
|
|
|
Post by Dragon Man on Dec 3, 2020 13:59:34 GMT
Nice processing Paul.
|
|