Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 20, 2014 19:59:40 GMT
Hi,
A good source of Peltier devices with their controls are the various cheap cool boxes-
www.dicksmith.com.au/travel-accessories/7litre-travel-cooler-and-warmer-dsau-m4501
just remove the bits you need. I actually found an eBay source of Peltier cooler units and bought a few, they were cheap enough.
This is what I did to an early MINTRON so long ago:
picasaweb.google.com/109921669020426367250/PeltierCoolingAMintron?authuser=0&feat=directlink
NOTE* I did add some small packets of blue indicator silica gel to absorb any internal moisture. However, I found the ramping up and then down the cooling avoided condensation and I let the camera return to normal working temp before switching off. I store all my cameras in separate sealed plastic containers-kitchen supplies butter boxes, with silica gel as a standard practice, keeps the camera innards completely dry until ext use. Rejuvenate the silica gel in the microwave or in the oven until it goes back to blue again (pink when full of moisture)
Clear skies...
Shevill
|
|